Greenlight Galvanometer Scanner

Homogenizing lenses are made of K9/quartz.

LiTaO3 is an important multifunctional crystal material with excellent piezoelectric, ferroelectric, acoustooptic and electro-optic effects. LiTaO3 has been successfully used in many devices and equipment, especially in electro-optic devices, infrared detectors and surface acoustic wave devices.

Ultraviolet galvanometer scanner‘s substrate is silicon/K9/quartz. It's mainly applied to the laser scanning devices of laser marking and 3D printing etc.

Ion Beam Figure Machine Tool is working by high beam density, small beam divergence angle and large beam uniformity High energy ion beam bombards the surface of optics, to achieve ultra-precision surface error. The generation of high-energy ions is based on high purity inert gas, passing through hollow cathode. The electrode generates ionization under the discharge of the power module and injects the electron beam into the cavity, and the electron beam is uniformly distributed into the anode area through the electron uniform plate under the action of the electric field and magnetic field of the anode. the electric field of the grid The output ion beam is controlled by the system to achieve uniform and stable surface removal of optical elements.

Lens'es substrate is K9/BK7/quartz.

Neodymium-doped yttrium aluminum garnet (Nd:YAG) is the earliest and most famous and widely used laser crystal.Because of its many excellent basic properties, Nd:YAG is still often used in near-far infrared solid-state lasers and their frequency doubling and frequency doubling.

Grown by Czochralski method
Diameter: up to 485mm
Dopant B (Borum)
Type of conductivity: P
Orientation: 100
Resistivity: up to 10000
Notch-yes Notch Location: 110
Notch size: 2,3 mm
shape of the Notch: V
Wafer thickness: 775±25 microns Type of marking: laser Marking location Reverse side Edge Profile: SEMI T/4 S1/S2 polishing- yes
Total thickness change across the wafers (TTV), microns < 3
WARP: <40 microns The number of particles on a surface larger
than 0.12 microns: <40
Surface content of Aluminum, E10AT/CM2: 5

The Computer Control Optic Surfacing Polisher Basing on industrial robot, The surface error is figured by the polishing spindle tool, using for optical plane, spherical and aspheric surface. The fitting polishing tool technology basing on the polishing force controller was developed to get the controllable Influence Function and finish the precision optical surface. And High Mark will provide full process solutions from micron to nanometre with the innovative process technology and software.